For connecting solar panels with Anderson Power Pole (APP) connectors to an 8mm input on a Goal Zero Yeti or Sherpa Power Pack.

SPECIFICATIONS:

• Port Input: APP
• Port Output: 8mm

Note: Do not exceed 14 AMP with this adapter cable.

The Solar Charging Optimization Module is an external maximum power point tracker (MPPT) and when installed properly, actively monitors and optimizes the energy source to maximize power input, resulting in up to 40% faster charge times, especially from solar panels.

FOR USE WITH GOAL ZERO YETI LITHIUM 1000 & 1400 PORTABLE POWER STATIONS. COMES PRE-INSTALLED ON YETI 3000 LITHIUM PORTABLE POWER STATIONS.

The new Yeti 200X delivers 187 Watt-Hours of lithium power and the latest fast-charging technology in a compact, ultra-portable design. Whether you’re headed out for a few days or the whole week, you’ve got the perfect amount of power to keep your essentials charged from door to destination and back again.

The Yeti 200X Power Station delivers high-quality lithium power you can rely on, housed in an ultra-portable design made to take anywhere. Yeti 200X is one of the most lightweight power stations on the market and the lightest Goal Zero Yeti to date.

Equipped with the latest charging technology, including a high-speed Power Delivery port capable of charging USB-C laptops, tablets, mirrorless cameras, and phones in a fraction of the time.

Charge the Yeti 200X from the sun with our portable solar panels while away from the grid and keep it topped off from a wall outlet when you’re home.

• Maximum input: 2 Hours
• Wall Charger: 4 Hours

Solar Charge Times

• Nomad 20: 12-24 Hours
• Boulder 50: 5-10 Hours
• Nomad 100: 2.5-5 Hours

Ports

• USB-A port (output): 5V, up to 2.4A (12W max), regulated
• USB-C port (output): 5-12V, up to 3A (18W max), regulated
• USB PD port (input/output): 5-20V, up to 3A (60W max), regulated
• 6mm port (output): 12V, up to 10A (120W max)
• 12V car port (output): 12V, up to 10A (120W max) regulated
• AC Inverter (output, modified sine wave): 120VAC, 60hZ, 1A (120W, 200W surge)
• Charging port (input,8mm): 13-22V, up to 7A (100W max), regulated

Battery Details

• Cell Chemistry: Li-ion NMC
• Peak Capacity: 187Wh (14.4V, up to 13Ah)
• Lifecycles: 500 cycles to 80% (discharge rate: 1C, full charge/discharge, Temp 25C)
• Shelf-life: Keep plugged in, or charge every 3-6 months
• Management system: MPPT charge controller, low battery protection

General

• Goal Zero #: 22070
• Chainable: No
• Weight: 5 lbs
• Dimensions 7.9” x 5.1” x 5.1”
• Operating Usage Temp: 32-104F
• Warranty: 24 Months

Run Time

Recharges

• Smart Phone (12 Wh): 16
• Tablet (30 Wh): 6
• Laptop (50 Wh): 4
• POV Camera (5 Wh): 38
• DSLR Camera (18 Wh): 11
• Head Lamp (5 Wh): 38

Hours of Runtime

• GZ Light (4.5 Wh): 41.5
• Light Bulb (11 Wh): 17
• Portable Fridge (25 Wh): 8

Get the most from the sun with the lightweight & portable BioLite SolarPanel 5+. Featuring BioLite's Optimal Sun System, an integrated sundial aligns you to the sun to capture direct rays while a 360 degree kickstand simplifies positioning on uneven terrain. The 2,200mAh onboard battery stores energy for later, allowing you to charge devices when you need it most. Power phones, tablets, and BioLite gear with this ultraslim 5-Watt panel.

• 5 watts of useable power via USB output
• 360 degree stand featuring Optimal Sun System
• Integrated 2,200mAh on-board battery
• Dimensions: 10.12” x 8.19” x 0.94”
• Weight: 13.76 oz

Full Features

• Kickstand
  • Position your panel from any angle or uneven terrain
• Battery and Charge Strength Indicator
  • See the strength of the sun to measure your panel capacity
• Battery Status Button
  • See how much juice you have stored in your 2200mAh battery
• Solar Panel
  • High-efficiency monocrystalline panel
• Sundial
  • Easy alignment to capture direct rays for maximum charge
• USB Charge Out
  • 5W output to charge phones, cameras, tablets, and other gear
• Micro USB Charge In
  • Get a headstart on your power by filling up the battery at home
• Corner Latches
  • Attach to a pack for external storage or to capture some watts on a hike

• Plastic body pea whistle
• Includes:

o Whistle

o Thermometer

o Magnifier – 2.5x strength

o Compass

• Weather and water resistant
• Keychain clip for versatile attachment options

Increase your home energy storage capacity with the Yeti Link Expansion Module and Yeti Tank Expansion Battery (sold separately). Yeti Link lets you connect Yeti Tank lead-acid batteries to your Yeti X or Yeti Lithium Power Station to increase your storage capacity at 1.2 kWh intervals. The Yeti Link comes with its own 120W Power Supply for charging from the wall. Usage Note: The Yeti Link Expansion Module and Yeti Lithium MPPT Solar Charging Optimization Module use the same expansion bay therefore they are unable to be used at the same time.

Includes

• Yeti Link Expansion Module
• 120W Power Supply
• Link Lock
• EC8 Straight Connector
• EC8 90° Connector

Charge Times

• Max Input from Yeti Tank to
• Goal Zero Yeti 1000/1000X: 454-605W
• Goal Zero Yeti 1400/1500X: 454-750W
• Goal Zero Yeti 3000/3000X: 750W
• Goal Zero Yeti 6000X: 750W

Ports

• Do not exceed 22V input
• 8mm Charging Port (input): 14 - 22V Do not exceed 150W (10A) per port
• External Battery Connector (output): 65A charge controller
• External Battery Connector (Input/Output): 10.7-15V. Do not exceed 15V
• YETI X 120W POWER SUPPLY
• Input: AC Wall Plug 100-240V - 50/60Hz 3.0A
• Output: 8.0mm 16V- 7.5A, 120W

General

• Goal Zero 98210
• Weight: 1.5 lbs (680 g)
• Dimensions: 10.25 x 3.3 x 1.5 in (26 x 8.4 x 3.8 cm)
• Warranty 12 months
• YETI X 120W POWER SUPPLY
• Gauge: 16AWG
• Cable Length: 9' 4"
• Dimensions: 2.5 x 5.9 x 1.4 in (6.5 x 15 x 3.5 cm)

Goal Zero Yeti Home Energy Storage

Customizable, versatile energy storage system backs up four essential circuits in your home and scales to meet your specific power needs.

Our industry-leading battery chaining technology allows you to connect cost-effective lead-acid batteries to our high-quality Yeti X and Yeti Lithium Power Stations to easily scale your energy storage capacity.

Integrate directly with your home's circuits for a more seamless backup power experience using the Yeti Home Integration Kit. Power everything from lights in high-use rooms and fridges to medical devices, internet modems, and more.

Yeti Link Vehicle Integration

Quickly and easily recharge a Yeti Lithium (1000X or higher) from your vehicle while on the move. Charge rates vary from 25A - 80A Max Current (300W -750W) depending on Yeti Lithium size and capacity.

When placed in “Vehicle Mode,” the Yeti Link allows your Yeti Lithium to safely pull power from your vehicle’s alternator while the vehicle is running and stop pulling power when the vehicle is off.

NOTE: Yeti Link must be in Vehicle Mode to utilize this feature or it will drain your vehicle’s battery. All Links come standard set in “Tank Mode.