• Battery backup allows for continuous monitoring during power outages
• Single test/silence button for simple operation
• Loud 85-decibel alarm sounds when CO levels are elevated
• CO detector plugs into any standard electrical socket
• Plug-in CO detector alerts you to carbon monoxide
• End-of-Life Warning

Specifications

• Power Sources:
• Plug in
• 9 volt battery backup
• Sensor Type: Electrochemical

• Dimensions: 5 in L x 3.4 in W x 1.38 in H
• Meets all UL Standards
• Warranty: 7-Year Limited
• First Alert CO605

About This Product

The First Alert CO605 Carbon Monoxide Plug-In Alarm features an electrochemical CO sensor to alert you to carbon monoxide. This carbon monoxide detector plugs into any standard electrical socket to monitor CO levels in your home. The simple, user-friendly design features battery backup to allow for continuous monitoring, even in the event of a power outage.

Features

• Dual Power Provides Continuous Monitoring: The plug-in carbon monoxide detector requires minimal installation, all it requires is a standard electrical outlet. In the event of a power outage, battery backup powers the CO detector so it can continue monitoring your home for dangerous levels of carbon monoxide.
• End-Of-Life Warning: A low-battery light and chirp will alert you when the carbon monoxide detector has reached the end of its life and is time to replace it with a new detector.
• Simple and Easy to Use: Once the First Alert CO605 Carbon Monoxide Alarm with battery backup has been installed, remember to test your plug-in CO detector, with the easy access test button, regularly and change the batteries at least twice a year.

Contains the necessary supplies to care for your pet for 3 days.

Pet food not included in kit. Set aside at least a 3 day supply of food that your pet would normally eat. Don't try something new in a disaster.

CONTAINS:

FOOD & WATER

24 – Water Pouches - 4.227 oz. each (5-year shelf life, U.S. Coast Guard Approved)

1 – Pet Feeding Dish

FIRST AID KIT

1 – Pet First Aid Guide

2 – Iodine Swab Sticks

4 – Antibiotic Ointments

2 (Pairs) – Non-Latex Gloves

4 – Cotton Tip Applicators

4 – Non-Adherent Pads, 3” x 4”

2 – Antiseptic Towelettes

1 – Scissor & Tweezer

2 – Triangular Bandage

1 – Sensi Flex Wrap 2”

1 – Gauze Roll 3" x 4.1 yds

1 – Eye Wash

SANITATION & COMFORT SUPPLIES

1 – Animal Control Lead

1 – Emergency Blanket

1 – Pet Window Cling Sticker

1 – Headlight with Batteries

15 – Pet Waste Bags

• Printed for quick identification
• Mountable case: mounting holes with brass grommets
• Carrying handle
• Bag dimensions: 16" x 14.5" x 35"

• Fire retardant blanket
• Meets Federal Flammable Fabrics Act CS 191-53
• Measures 66" x 90"
• Weight: 3.15 lbs
• Wool / polyester mix

• Includes smoke alarm status LED indicator, end-of-life signal, and test/silence button
• Smoke detector with built-in 10-year 3-volt lithium power cell
• Ionization sensor for efficient smoke detection
• Complies with current 10-year legislation in states/cities where required
• Tamper-proof design prevents batteries from being removed

Specifications

• Power Source: 10-Year sealed lithium battery
• Sensor Type: Ionization
• Dimensions: 5.7 in W x 2.25 in H
• Mounting hardware included
• Meets all UL Standards
• Warranty: 10-Year Limited
• First Alert 0827B

About This Product

The First Alert 0827B Sealed Ionization Smoke Alarm features a 10-year sealed lithium battery, eliminating the need for battery replacements during the lifetime of the alarm. This smoke detector with ionization sensor has a tamper-proof design, a mute feature, a power LED and alarm indicator, end of life warning, and single test button.

Features

• No Battery Replacements for the Life of the Alarm: The First Alert 0827B Sealed Ionization Smoke Alarm features a built-in 3-volt lithium power cell that lasts for 10 years, eliminating the need for battery replacements for the life of the alarm. Using a smoke detector system with a sealed battery provides the ultimate in longevity and security, preventing possible lapses in protection.
• Tamper-proof Design Prevents Battery from Being Removed: Thanks to a tamper-proof design, the batteries in the First Alert 0827B Sealed Ionization Smoke Alarm can’t be removed. This smoke detector complies with current 10-year legislation in states/cities where required, making it a great addition for any number of properties where sealed/tamper-proof alarms are required.
• Easy-to-Use Features: If the alarm goes off accidentally, simply press the silence button to stop the noise. The same button allows you to test the alarm to ensure it is working properly. An LED indicator blinks to let you know the smoke detector is receiving power and working regularly. When the alarm reaches the end of its service life, it will chirp once a minute to let you know the battery is almost depleted. This smoke alarm features a Perfect Mount system for easy alignment and installation.

• Photoelectric sensor detects smoke while minimizing false alarms
• Slim, easy-to-install design is half as thick as a standard smoke alarm
• Built-in 10-year battery offers continuous power for the life of the detector
• Electrochemical sensor alerts you to carbon monoxide danger from multiple sources
• Low-profile smoke and carbon monoxide alarm detects two potentially deadly threats

Specifications

• Power Source: 10-Year sealed lithium battery
• Sensor Type: Photoelectric, Electrochemical
• Dimensions: 5.67 in W x 1 in H
• Mounting hardware included
• Meets all UL Standards
• Warranty: 10-Year Limited
• First Alert PRC710

About This Product

The First Alert PRC710 Slim Photoelectric Smoke and Carbon Monoxide Alarm with 10-Year Battery helps protect your home from two potentially deadly threats by providing up to a decade of uninterrupted monitoring. Equipped with dual sensors, this low-profile alarm detects smoke from slow-burning, smoldering fires. Half as thick as a standard alarm, this detector has a slim, contemporary design that mounts unobtrusively on a wall or ceiling. A built-in 10-year lithium-ion battery provides continuous power, with no need to worry about changing the battery during the lifetime of the alarm.

Features

• Photoelectric Sensor Warns of Smoldering Fires: The First Alert PRC710 alarm comes equipped with a photoelectric sensor to provide the earliest possible warning of fire. The sensor is optimized to detect larger smoke particles produced by smoldering fires, such as those caused by unextinguished cigarettes. It also distinguishes between real threats, smoke and vapor produced during showering, cooking, and other everyday activities, helping minimize the number of false alarms. A patented smoke entry system helps ensure reliable detection by providing a direct air pathway to the sensor.
• Electrochemical Sensor Monitors CO Levels: The alarm also features an advanced electrochemical sensor that detects carbon monoxide leaks from a variety of sources, such as faulty fuel-burning appliances, blocked chimneys, and cars left running in the garage. Carbon monoxide can’t be seen, smelled, or tasted in the air, and it is the leading cause of accidental poisoning deaths in America. By placing carbon monoxide detectors on every floor of the home and in each sleeping room, you can help protect your family from the danger of carbon monoxide.
• Built-In 10-Year Battery: The First Alert PRC710 10-Year Photoelectric Smoke and Carbon Monoxide Alarm features a built-in 10-year lithium battery that provides continuous power for the life of the detector. An end-of-life warning lets you know when the device should be replaced.
• Sleek, Low-Profile Design: Half as thick as a standard alarm, the First Alert PRC710 Photoelectric Smoke and Carbon Monoxide Alarm packs premium detection features into a sleek, compact unit. The ultra-thin design features a white finish that blends seamlessly with most home decor.
• Battery-Powered Alarm Installs Easily: This battery-powered smoke and carbon monoxide detector requires no rewiring to install. Simply mount it on a wall or ceiling using the versatile twist-lock mounting bracket. An end-of-life warning will notify you when the detector is nearing expiration.
• Alerts You to Danger: When a threat is detected, the smoke and carbon monoxide alarm sounds a loud 85-decibel alarm. A single button allows you to silence alarms and test if the device is working.

• Designed for First Alert REC5, AUTOMAR10 & GARAGE10 and HOME1 Fire Extinguisher products
• Holds 2.5 lb fire extinguishers
• Mount is designed and approved for wall, marine and vehicle use
• Corrosion-resistant, black powder coated steel
  

Specifications

• Dimensions: 7.8 in x 2 in
• Meets all UL Standards
• Warranty: 1-Year Limited
• First Alert BRACKET2

About This Product

The First Alert Fire Extinguisher Mounting Bracket features all of the required hardware needed to install First Alert Fire Extinguisher Models: REC5, GARAGE10, AUTOMAR10 and HOME1. This bracket features a variety of installation options and can be mounted on walls or used for marine and vehicles. The First Alert Small Fire Extinguishing Bracket meets all UL Standards.

Features

• Accommodates Multiple Fire Extinguisher Models: The First Alert BRACKET2 Replacement Fire Extinguisher Bracket is compatible with multiple First Alert fire extinguisher products including the: REC5, AUTOMAR10, GARAGE10 and HOME1.
• Approved for Multi-Location Mounting: The First Alert Small Fire Extinguisher Bracket features a variety of installation options and can be mounted on walls or used for marine and vehicles.
• Durable Construction: This fire extinguisher bracket that you mount on the wall is made from a corrosion-resistant, black powder coated steel and comes with stainless steel straps for long-lasting durability.