Increase your home energy storage capacity with the Yeti Link Expansion Module and Yeti Tank Expansion Battery (sold separately). Yeti Link lets you connect Yeti Tank lead-acid batteries to your Yeti X or Yeti Lithium Power Station to increase your storage capacity at 1.2 kWh intervals. The Yeti Link comes with its own 120W Power Supply for charging from the wall. Usage Note: The Yeti Link Expansion Module and Yeti Lithium MPPT Solar Charging Optimization Module use the same expansion bay therefore they are unable to be used at the same time.

Includes

• Yeti Link Expansion Module
• 120W Power Supply
• Link Lock
• EC8 Straight Connector
• EC8 90° Connector

Charge Times

• Max Input from Yeti Tank to
• Goal Zero Yeti 1000/1000X: 454-605W
• Goal Zero Yeti 1400/1500X: 454-750W
• Goal Zero Yeti 3000/3000X: 750W
• Goal Zero Yeti 6000X: 750W

Ports

• Do not exceed 22V input
• 8mm Charging Port (input): 14 - 22V Do not exceed 150W (10A) per port
• External Battery Connector (output): 65A charge controller
• External Battery Connector (Input/Output): 10.7-15V. Do not exceed 15V
• YETI X 120W POWER SUPPLY
• Input: AC Wall Plug 100-240V - 50/60Hz 3.0A
• Output: 8.0mm 16V- 7.5A, 120W

General

• Goal Zero 98210
• Weight: 1.5 lbs (680 g)
• Dimensions: 10.25 x 3.3 x 1.5 in (26 x 8.4 x 3.8 cm)
• Warranty 12 months
• YETI X 120W POWER SUPPLY
• Gauge: 16AWG
• Cable Length: 9' 4"
• Dimensions: 2.5 x 5.9 x 1.4 in (6.5 x 15 x 3.5 cm)

Goal Zero Yeti Home Energy Storage

Customizable, versatile energy storage system backs up four essential circuits in your home and scales to meet your specific power needs.

Our industry-leading battery chaining technology allows you to connect cost-effective lead-acid batteries to our high-quality Yeti X and Yeti Lithium Power Stations to easily scale your energy storage capacity.

Integrate directly with your home's circuits for a more seamless backup power experience using the Yeti Home Integration Kit. Power everything from lights in high-use rooms and fridges to medical devices, internet modems, and more.

Yeti Link Vehicle Integration

Quickly and easily recharge a Yeti Lithium (1000X or higher) from your vehicle while on the move. Charge rates vary from 25A - 80A Max Current (300W -750W) depending on Yeti Lithium size and capacity.

When placed in “Vehicle Mode,” the Yeti Link allows your Yeti Lithium to safely pull power from your vehicle’s alternator while the vehicle is running and stop pulling power when the vehicle is off.

NOTE: Yeti Link must be in Vehicle Mode to utilize this feature or it will drain your vehicle’s battery. All Links come standard set in “Tank Mode.

Get the most from the sun with the lightweight & portable BioLite SolarPanel 5+. Featuring BioLite's Optimal Sun System, an integrated sundial aligns you to the sun to capture direct rays while a 360 degree kickstand simplifies positioning on uneven terrain. The 2,200mAh onboard battery stores energy for later, allowing you to charge devices when you need it most. Power phones, tablets, and BioLite gear with this ultraslim 5-Watt panel.

• 5 watts of useable power via USB output
• 360 degree stand featuring Optimal Sun System
• Integrated 2,200mAh on-board battery
• Dimensions: 10.12” x 8.19” x 0.94”
• Weight: 13.76 oz

Full Features

• Kickstand
  • Position your panel from any angle or uneven terrain
• Battery and Charge Strength Indicator
  • See the strength of the sun to measure your panel capacity
• Battery Status Button
  • See how much juice you have stored in your 2200mAh battery
• Solar Panel
  • High-efficiency monocrystalline panel
• Sundial
  • Easy alignment to capture direct rays for maximum charge
• USB Charge Out
  • 5W output to charge phones, cameras, tablets, and other gear
• Micro USB Charge In
  • Get a headstart on your power by filling up the battery at home
• Corner Latches
  • Attach to a pack for external storage or to capture some watts on a hike

Used to safely combine two or more Goal Zero Solar Panels with 8mm outputs into an array with a single High Power Port (HPP) connector. For use with larger Goal Zero Yeti Portable Power Stations with an HPP input.

SPECIFICATIONS:

• Port Input: 8mm
• 1 Port Output: HPP
• Used with: Yeti and Solar
• Goal Zero 98060

Used to regulate the HPP output of a Goal Zero Yeti Lithium to a consistent voltage, improving compatibility with 12V-powered devices. This product is not needed for Yeti X Power Stations or Yeti Lead Acid Power Stations as 12V regulation is included in the base product.

SPECIFICATIONS:

• Port Input: High Power Port
• Port Output: High Power Port (12V, up to 15A max)
• Port Output: Female Cigarette (12V, up to 15A max)

• Used with: Goal Zero Yeti 1000, 1400, and 3000 Lithium Power Stations
• Note: Compatible with Yeti Lithium Power Stations.
• Goal Zero 98078

The Nomad 10 Watt panel gives you the solar collecting capacity needed to charge your phone anywhere the sun shines. The Nomad 10 features a built-in flip dock and adjustable kickstand that clicks and locks into place for added stability.

-Ideal for: smart phones, power banks, flip & other small devices
-Outputs: USB Port 5V, up to 2A (10W Max)
-Dimensions (unfolded): 9.5 x 14.5 x 0.75 in (24.1 x 36.8 x 1.9cm)
-Dimensions (folded): 9.5 x 7.2 x 1.25 in (24.1 x 18.4 x 3.2 cm)