The Solar Charging Optimization Module is an external maximum power point tracker (MPPT) and when installed properly, actively monitors and optimizes the energy source to maximize power input, resulting in up to 40% faster charge times, especially from solar panels.

FOR USE WITH GOAL ZERO YETI LITHIUM 1000 & 1400 PORTABLE POWER STATIONS. COMES PRE-INSTALLED ON YETI 3000 LITHIUM PORTABLE POWER STATIONS.

For connecting solar panels with Anderson Power Pole (APP) connectors to an 8mm input on a Goal Zero Yeti or Sherpa Power Pack.

SPECIFICATIONS:

• Port Input: APP
• Port Output: 8mm

Note: Do not exceed 14 AMP with this adapter cable.

Keep all of your small to medium size devices and appliances charged with the Yeti 500X Portable Power Station. Designed to pack 20% more power into a 20% smaller and lighter shell than its predecessor, the 500X is perfect for longer camping trips, backyard parties, or on-the-go power in case of an emergency.

Yeti 500X is equipped with four different port options—including AC, 12V, and 60W USB-C PD—to power everything from phones to portable fridges.

Equipped with the latest charging technology, including a high-speed Power Delivery port capable of charging USB-C laptops, tablets, mirrorless cameras, and phones in a fraction of the time.

Charge the Yeti 500X from the sun with our portable solar panels while away from the grid and keep it topped off from a wall outlet when you’re home. Featured MPPT charge controller ensures you’re getting the most efficient solar charge possible.

• Maximum input (180W): 3 hrs
• Car charger (120W): 4.5 hrs
• Wall charger (60W): 8.5 hrs

Solar Charge Times

• Nomad 20: 29-58 Hours
• Boulder 50: 12-24 Hours
• Boulder 100 Briefcase: 6-12 Hours
• Boulder 100: 6-12 Hours
• Boulder 200 Briefcase: 3-6 Hours

Ports

• USB port (Output): 5V, up to 2.4A (12W max), regulated
• USB-C port (Output): 5/9V, up to 3.0A (18W max), Regulated
• USB-C PD port (Input/ Output): 5-20V, up to 3.0A (60W max), Regulated
• 6mm port (Output, 6mm): 12V, up to 10A (120W max)
• 12V car port (Output): 12V, up to 10A (120W max), Regulated
• 120V AC Inverter: 120VAC 60Hz, 2.5A (300W, 1200W surge) (output, pure sine wave)
• Charging port (input, 8mm): 13-22V, up to 10A (120W max)

Battery Details

• Cell chemistry: Li-ion NMC
• Pack capacity: 505Wh (10.8V, 46.8Ah)
• Lifecycles: 500 Cycles to 80% capacity (Discharge rate: 0.2C, Full charge/discharge, Temp: 25C)
• Shelf-life: Charge every 3-6 months
• Management system: 'MPPT' charge controller, low battery protection

General

• Goal Zero #: 36100
• Chainable: No
• Weight: 12.9 lbs
• Dimensions: 7.5” x 11.25” x 5.8”
• Operating usage temp.: 32-104 F
• Warranty: 24 months

Run Time

Recharges

• Smart Phone (12 Wh): 42
• Tablet (30 Wh): 17
• Laptop (50 Wh): 10
• POV Camera (5 Wh): 101
• DSLR Camera (18 Wh): 28
• Head Lamp (5 Wh): 101

Hours of Runtime

• GZ Light (4.5 Wh): 112
• Light Bulb (11 Wh): 46
• CPAP (65 Wh): 8
• TV (42" LED) (100 Wh): 5
• Pellet Grill (60 Wh): 9
• Portable Fridge (25 Wh): 20

Gives you 30 extra feet to connect solar panels to each other or Power Banks with this efficient extension cable. The Boulder 30 extension cable keeps all your solar panels conveniently connected to the Goal Zero Yeti’s or Power Banks for a much more efficient use and performance.

SPECIFICATIONS:
- Cord Length: 30’
- Gauge: 16
- Input: 8.0 mm
- Output: 8.0 mm

RECOMMENDED PAIRINGS:
- Boulder & Nomad Solar Panels (sold separately)
- Sherpa Power Banks (sold separately)

Used to safely combine two or more power sources or solar panels with Anderson Power Pole (APP) connectors into an array with a single APP connector. To be used with larger Goal Zero Yeti Portable Power Stations with an APP input.

SPECIFICATIONS:
- Input: APP
- Output: APP