Light up emergency exit sign. White plastic housing. Slimline, ultra compact, low profile. This double-sided LED exit sign can be mounted in a variety of ways. Mount flush against a wall, protruding away from the wall or onto the ceiling.

• Ultra-compact, low-profile design in neutral finish
• Energy-efficient LED technology
• EZ snap-out Chevron directional indicators
• Charge rate/power "ON" LED indicator light and push-totes switch for mandated code compliance testing
• LVD (low voltage disconnect) prevents battery from deep discharge
• Long-life, maintenance-free, rechargeable Nickel-Cadmium battery
• Internal transfer switch automatically connects the internal battery to LED Board for minimum 90 min emergency illumination
• Fully automatic charger initiates battery charging to recharge a discharged battery in 24 hr
• Dimensions: 1 5/8” Deep x 11 5/8” Wide x 7 3/16” High

• Battery backup allows for continuous monitoring during power outages
• Single test/silence button for simple operation
• Loud 85-decibel alarm sounds when CO levels are elevated
• CO detector plugs into any standard electrical socket
• Plug-in CO detector alerts you to carbon monoxide
• End-of-Life Warning

Specifications

• Power Sources:
• Plug in
• 9 volt battery backup
• Sensor Type: Electrochemical

• Dimensions: 5 in L x 3.4 in W x 1.38 in H
• Meets all UL Standards
• Warranty: 7-Year Limited
• First Alert CO605

About This Product

The First Alert CO605 Carbon Monoxide Plug-In Alarm features an electrochemical CO sensor to alert you to carbon monoxide. This carbon monoxide detector plugs into any standard electrical socket to monitor CO levels in your home. The simple, user-friendly design features battery backup to allow for continuous monitoring, even in the event of a power outage.

Features

• Dual Power Provides Continuous Monitoring: The plug-in carbon monoxide detector requires minimal installation, all it requires is a standard electrical outlet. In the event of a power outage, battery backup powers the CO detector so it can continue monitoring your home for dangerous levels of carbon monoxide.
• End-Of-Life Warning: A low-battery light and chirp will alert you when the carbon monoxide detector has reached the end of its life and is time to replace it with a new detector.
• Simple and Easy to Use: Once the First Alert CO605 Carbon Monoxide Alarm with battery backup has been installed, remember to test your plug-in CO detector, with the easy access test button, regularly and change the batteries at least twice a year.

• Low-profile smoke alarm reliably detects smoke from smoldering fires
• Photoelectric sensor detects smoke while minimizing false alarms
• Slim, easy-to-install design is half as thick as a standard smoke detector
• Built-in 10-year battery offers continuous power for the life of the alarm
• Patented smoke entry system allows for a direct path to the sensor

Specifications

• Power Source: 10-Year sealed lithium battery
• Sensor Type: Photoelectric
• Dimensions: 5.13 in W x 1 in H
• Mounting hardware included
• Meets all UL Standards
• Warranty: 10-Year Limited
• First Alert PR710

About This Product

The First Alert PR710 Slim Photoelectric Smoke Alarm with 10-Year Battery helps protect your home by providing up to a decade of uninterrupted monitoring. This low-profile smoke alarm uses an ultra-reliable photoelectric sensor to detect smoke from slow-burning, smoldering fires. Half as thick as a standard alarm, this detector has a slim, contemporary design that mounts unobtrusively on a wall or ceiling. A built-in 10-year lithium-ion battery provides continuous power, with no need to worry about changing the battery over the lifetime of the smoke detector.

Features

• Photoelectric Sensor Warns of Smoldering Fires: The First Alert PR710 alarm comes equipped with a photoelectric sensor to provide the earliest possible warning of fire. The sensor is optimized to detect larger smoke particles produced by smoldering fires, such as those caused by un-extinguished cigarettes. It also distinguishes between real threats and smoke and vapor produced during showering, cooking, and other everyday activities, helping minimize the number of false alarms. A patented smoke entry system helps ensure reliable detection by providing a direct air pathway to the sensor.
• Built-In 10-Year Battery: The First Alert PR710 10-Year Photoelectric Smoke Alarm features a built-in 10-year lithium battery that provides continuous power for the life of the detector. An end-of-life warning lets you know when the device should be replaced.
• Sleek, Low-Profile Design: Half as thick as a standard alarm, the First Alert PR710 Photoelectric Smoke Alarm packs premium detection features into a sleek, compact unit. The ultra-thin design features a white finish that blends seamlessly with most home decor.
• Battery-Powered Alarm Installs Easily: This battery-powered smoke detector requires no rewiring to install. Simply mount it on a wall or ceiling using the versatile twist-lock mounting bracket.
• Alerts You to Danger: When smoke is detected, the smoke alarm sounds a loud 85-decibel siren that is designed to be easily heard. A single button allows you to silence alarms and test if the device is working.

• Includes smoke alarm status LED indicator, end-of-life signal, and test/silence button
• Smoke detector with built-in 10-year 3-volt lithium power cell
• Ionization sensor for efficient smoke detection
• Complies with current 10-year legislation in states/cities where required
• Tamper-proof design prevents batteries from being removed

Specifications

• Power Source: 10-Year sealed lithium battery
• Sensor Type: Ionization
• Dimensions: 5.7 in W x 2.25 in H
• Mounting hardware included
• Meets all UL Standards
• Warranty: 10-Year Limited
• First Alert 0827B

About This Product

The First Alert 0827B Sealed Ionization Smoke Alarm features a 10-year sealed lithium battery, eliminating the need for battery replacements during the lifetime of the alarm. This smoke detector with ionization sensor has a tamper-proof design, a mute feature, a power LED and alarm indicator, end of life warning, and single test button.

Features

• No Battery Replacements for the Life of the Alarm: The First Alert 0827B Sealed Ionization Smoke Alarm features a built-in 3-volt lithium power cell that lasts for 10 years, eliminating the need for battery replacements for the life of the alarm. Using a smoke detector system with a sealed battery provides the ultimate in longevity and security, preventing possible lapses in protection.
• Tamper-proof Design Prevents Battery from Being Removed: Thanks to a tamper-proof design, the batteries in the First Alert 0827B Sealed Ionization Smoke Alarm can’t be removed. This smoke detector complies with current 10-year legislation in states/cities where required, making it a great addition for any number of properties where sealed/tamper-proof alarms are required.
• Easy-to-Use Features: If the alarm goes off accidentally, simply press the silence button to stop the noise. The same button allows you to test the alarm to ensure it is working properly. An LED indicator blinks to let you know the smoke detector is receiving power and working regularly. When the alarm reaches the end of its service life, it will chirp once a minute to let you know the battery is almost depleted. This smoke alarm features a Perfect Mount system for easy alignment and installation.

• Designed for First Alert HOME2 and PRO5 Fire Extinguishers
• Holds 5 lb fire extinguishers
• Mount is designed and approved for wall, marine and vehicle use
• Corrosion-resistant, black powder coated steel

Specifications

• Dimensions: 8.3 in x 2.5 in
• Meets all UL Standards
• Warranty: 1-Year Limited
• First Alert BRACKET5

About This Product

The First Alert BRACKET5 Replacement Fire Extinguisher Bracket includes everything you need to securely mount your First Alert fire extinguisher. Designed to accommodate First Alert HOME2 and PRO5 fire extinguisher models, this fire extinguisher mount is approved for wall, marine and vehicle use. The fire extinguisher holder is made from durable corrosion-resistant steel and comes with stainless steel straps for long-lasting durability.

Features

• Approved for Multi-Location Mounting: The First Alert BRACKET5 Replacement Fire Extinguisher Bracket is compatible with multiple fire extinguisher models including the: HOME2 and PRO5.
• Durable Construction: The First Alert Replacement Fire Extinguisher Bracket features an incredible amount of installation options and can successfully be mounted on walls or be implemented for marine and vehicle use. This fire extinguisher bracket is made from a corrosion-resistant, black powder coated steel and comes with stainless steel straps for long-lasting durability.

• Easy instructions with a chemical resistant & water proof label with 4-step instructions won’t deteriorate
• Secure extinguisher mount, bracket and strap are included for secure placement of extinguisher
• Safety seal to help prevent accidental discharge and discourage tampering

Specifications

• Color: Red
• Dimensions: 10.4 in x 4 in x 3 in
• Capacity: 1.4 lbs
• Rechargeable: No
• Mounting bracket with strap included
• Meets all UL Standards
• Warranty: 10-Year Limited
• First Alert AUTO5

About This Product

The First Alert Auto Fire Extinguisher is compact – and can be stored in any car or vehicle. 5-B:C rated compact car fire extinguishers are ideal for use in vehicles. Fights flammable liquid and electrical fires. Small enough to fit in the trunk. Includes heavy duty mounting bracket to keep unit secure. Meets UL standards.

Features

• Ideal for Storage and Use in Vehicles: The AUTO5 extinguisher is ideal for use and storage in all types of vehicles and can be recharged by a certified professional when used. It is designed to fight flammable liquid and electrical fires.
• Durable Construction: The Auto Fire Extinguisher features a safety seal, that deters accidental discharge and discourages tampering. It comes included with a secure mounting bracket and strap for secure placement of the extinguisher.
• Easy to Use: This fire extinguisher includes easy to follow, 4-step instructions right on extinguisher. The label is chemical resistant and water proof, so you do not have to worry about it deteriorating.