| Description | - Item # 21408
- Color: Yellow
- 4 point suspension with Ratchet
- SEI Certified to the NFPA 1977 Standard
- Includes Nomex/Kevlar chin strap.
| - Item # 20905
- Built-in 10-year battery offers continuous power for the life of the detector
This smoke detector with ionization
sensor has a tamper-proof design, a power LED and alarm
indicator, end of life warning, and single test button.
| - Item # 20910
- Protect your
property from wildfires
- Gas-driven
- Use any nearby stream, pond or pool for your water source
| - Item # 21421A
- Color: Hi-Vis Lime
- 4 point nylon suspension
- Easy Quick-Slide for sizing
- Meets ANSI/ISEA Z89.1
| - Item # 21421
- Color: Green
- 4 point nylon suspension
- Easy Quick-Slide for sizing
- Meets ANSI/ISEA Z89.1
| - Item # 20870
- Holds 2.5 lb fire extinguishers
- Mount is designed and approved for wall, marine and vehicle use
- Corrosion-resistant, black powder coated steel
|
| Content | ERB Americana Wildlands full brim with mega ratchet suspension. Meets NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition and ANSI/ISEA Z89.1-2009 Type I, Class C, E, and G requirements. Nomex/Kevlar Chinstrap w/postman's slide fastener and quick release buckle. Made in USA - Color: Yellow
- Suspension: 4 point woven nylon suspension with Mega Ratchet
- Head Size: Adjusts from 6½ - 8
- Brow pad: Moisture-wicking. Removable, washable and replaceable.
- SEI Certified to the NFPA 1977 Standard and ANSI/ISEA Z89.1.
- Three goggle retaining clips on shell.
- Four fluorescent yellow retro-reflective strips attached to shell.
- Hook tape for affixing neck shroud.
- Glare reducing feature under the front brim.
- Includes Nomex/Kevlar chin strap.
- Chin strap has a metal postman's slide fastener and quick-release buckle.
Made in USA | - Includes smoke alarm status LED indicator, end-of-life signal, and test/silence button
- Smoke detector with built-in 10-year 3-volt lithium power cell
- Ionization sensor for efficient smoke detection
- Complies with current 10-year legislation in states/cities where required
- Tamper-proof design prevents batteries from being removed
Specifications
- Power Source: 10-Year sealed lithium battery
- Sensor Type: Ionization
- Dimensions: 5.7 in W x 2.25 in H
- Mounting hardware included
- Meets all UL Standards
- Warranty: 10-Year Limited
- First Alert 0827B
About This Product
The First Alert 0827B Sealed Ionization Smoke Alarm features a 10-year sealed lithium battery, eliminating the need for battery replacements during the lifetime of the alarm. This smoke detector with ionization sensor has a tamper-proof design, a mute feature, a power LED and alarm indicator, end of life warning, and single test button. Features
- No Battery Replacements for the Life of the Alarm: The First Alert 0827B Sealed Ionization Smoke Alarm features a built-in 3-volt lithium power cell that lasts for 10 years, eliminating the need for battery replacements for the life of the alarm. Using a smoke detector system with a sealed battery provides the ultimate in longevity and security, preventing possible lapses in protection.
- Tamper-proof Design Prevents Battery from Being Removed: Thanks to a tamper-proof design, the batteries in the First Alert 0827B Sealed Ionization Smoke Alarm can’t be removed. This smoke detector complies with current 10-year legislation in states/cities where required, making it a great addition for any number of properties where sealed/tamper-proof alarms are required.
- Easy-to-Use Features: If the alarm goes off accidentally, simply press the silence button to stop the noise. The same button allows you to test the alarm to ensure it is working properly. An LED indicator blinks to let you know the smoke detector is receiving power and working regularly. When the alarm reaches the end of its service life, it will chirp once a minute to let you know the battery is almost depleted. This smoke alarm features a Perfect Mount system for easy alignment and installation.
| Protect your property with a complete firefighting package from Pacer Pumps. This system aids in extinguishing a fire or helping to control it until the fire company arrives. The fire pump is ideal for use on buildings, brush, and wooded areas. Use any nearby stream, pond, pool, or shallow well for your water source.
This low-pressure pump is designed for emergency wet-down. Gas-driven and powered by a 5.5 HP Briggs & Stratton OHV engine.
Features - SEB2UL E950 2" 5.5 HP self-priming pump
- 100 ft. 1 1/2" Discharge Hose
- 20 ft. 2" Suction Hose
- 1 1/2" Adjustable Spray Nozzle
- 1 1/2" Street Elbow
- 2" x 1 1/2" Reducing Nipple
- 2" Steel Nipple
- 2" Strainer
- Roll Teflon Tape
- Roll Cage included
Gas tank: 3 quart Runs for 1.5 hours Oil: Uses 20 ounces
| Molded from high density polyethylene. Features short peak and trim profile. 4-point woven nylon suspension. Easy Quick-Slide sizing.
- Color: Hi-Vis Lime
- Suspension: 4 point woven nylon suspension with Slide-Lock
- Head Size: Adjusts from 6½ - 8
- Brow pad: Moisture-wicking. Removable, washable and replaceable.
- Accessory slots: Accommodate a variety of eye, face and hearing products
- Chin strap (Not Included)
- Goggle retaining slots on suspension
- ERB Americana
- Certification: Meets ANSI/ISEA Z89.1, TYPE 1 Class C, E, and G.
| Molded from high density polyethylene. Features short peak and trim profile. 4-point woven nylon suspension. Easy Quick-Slide sizing.
- Color: Green
- Suspension: 4 point woven nylon suspension with Slide-Lock
- Head Size: Adjusts from 6½ - 8
- Brow pad: Moisture-wicking. Removable, washable and replaceable.
- Accessory slots: Accommodate a variety of eye, face and hearing products
- Chin strap (Not Included)
- Goggle retaining slots on suspension
- ERB Americana
- Certification: Meets ANSI/ISEA Z89.1, TYPE 1 Class C, E, and G.
| - Designed for First Alert REC5, AUTOMAR10 & GARAGE10 and HOME1 Fire Extinguisher products
- Holds 2.5 lb fire extinguishers
- Mount is designed and approved for wall, marine and vehicle use
- Corrosion-resistant, black powder coated steel
Specifications - Dimensions: 7.8 in x 2 in
- Meets all UL Standards
- Warranty: 1-Year Limited
- First Alert BRACKET2
About This Product
The First Alert Fire Extinguisher Mounting Bracket features all of the required hardware needed to install First Alert Fire Extinguisher Models: REC5, GARAGE10, AUTOMAR10 and HOME1. This bracket features a variety of installation options and can be mounted on walls or used for marine and vehicles. The First Alert Small Fire Extinguishing Bracket meets all UL Standards. Features
- Accommodates Multiple Fire Extinguisher Models: The First Alert BRACKET2 Replacement Fire Extinguisher Bracket is compatible with multiple First Alert fire extinguisher products including the: REC5, AUTOMAR10, GARAGE10 and HOME1.
- Approved for Multi-Location Mounting: The First Alert Small Fire Extinguisher Bracket features a variety of installation options and can be mounted on walls or used for marine and vehicles.
- Durable Construction: This fire extinguisher bracket that you mount on the wall is made from a corrosion-resistant, black powder coated steel and comes with stainless steel straps for long-lasting durability.
|
Reviews
There are no reviews yet.